Long flight time – even with a payload
The DJI Matrice 400 provides up to 59 minutes of flight time – even when flying with a light payload. This makes it ideal for firefighting, search and rescue missions, and large-scale mapping. What’s more, the drone can hover for around 53 minutes. In addition, the DJI Matrice 400 moves surprisingly fast and safely at the same time – flying at speeds of up to 25 m/s, it smoothly avoids obstacles such as mountains and buildings. It is ideal for demanding operations in difficult terrain!
Payload capacity of up to 6 kg – compatibility with multiple modules
With a payload capacity of up to 6 kg, you can easily adapt the DJI Matrice 400 drone to your current operational requirements. The device is compatible with Zenmuse H30 and P1 series cameras, as well as the Zenmuse L2 laser scanner. You can also attach Zenmuse S1 lighting, Zenmuse V1 speaker, or modules from other manufacturers. Four external E-Port V2 ports allow you to mount up to seven payloads simultaneously.
Not afraid of difficult conditions
Operating in unfavorable conditions? No problem for the DJI Matrice 400! The drone has an IP55 rating, which means it is resistant to water and dust – it can operate without hindrance in rain or dusty environments. It is also not afraid of frost or heat – it operates without any problems in temperatures ranging from -20°C to 50°C.
Detection of even small obstacles
The drone uses an advanced obstacle detection system that integrates a rotating LiDAR sensor, high-precision mmWave radar, and a set of fisheye sensors optimized for low-light conditions. This allows it to effectively detect various types of obstacles, including high-voltage power lines, even in darkness, rain, or fog. All this translates into unmatched flight safety regardless of conditions!
Reliable video transmission
Ten antennas mounted on the drone, a high-gain antenna system in the control equipment, and O4 Enterprise Enhanced Video Transmission System technology ensure stable video transmission at distances of up to 20 km. The DJI Matrice 400 also supports the sub2G frequency band, and when combined with two separately sold DJI Cellular Dongle 2 devices, it can automatically switch to a better network, ensuring a stable signal even in adverse conditions. In addition, the built-in transmission relay module allows the device to serve as a relay drone for other unmanned aerial vehicles, significantly extending the range of operation. This solution is ideal for search and rescue missions, as well as inspections in mountainous areas.
Stable and safe flight
Rotating LiDAR, mmWave radar, and fisheye sensors ensure precise obstacle detection in all directions and reliable positioning. Thanks to them, the drone guarantees stable flight even near structures with glass facades or wind turbine blades. It is also possible to return safely from the edges of buildings or bridges, even in situations where the return point has not been updated. Also noteworthy is the full-color vision assistance system, which increases the safety of every operation.
Several flight modes to choose from
Use the available modes to further streamline each operation. In Cruise mode, you can fly the drone in a specific direction without constantly pressing the control sticks, making it easier to fly long distances or perform linear inspections. The FlyTo feature allows the DJI Matrice 400 to automatically adjust its route and speed based on the surrounding environment, allowing it to reach its destination without manual adjustment. Smart Track, on the other hand, allows for precise tracking, automatic zoom adjustment, and easy switching between objects. The drone can automatically redetect the target even if it is temporarily obscured! There is also a POI mode that allows for continuous observation and 3D modeling of buildings while orbiting over a designated area.
Smart features to make your work easier
When paired with a Zenmuse H30 series camera, the DJI Matrice 400 drone can detect vehicles, ships, and other objects, for example during search and rescue operations or routine surveillance. In addition, the device offers high-resolution photography and allows for smooth tracking of designated targets. Advanced AR features are also available. Power Line AR displays lines on the camera screen showing obstacles in the form of wires, Map View AR shows the names of buildings and landmarks in real time, and AR Flight Waypoint displays the flight path during RTH, obstacle avoidance, or FlyTo operations. It is also possible to mark points on the controller display or outline areas to calculate their size. Measurement results can be synchronized with DJI FlightHub 2.
Even more possibilities
The DJI Matrice 400 supports Real-Time Terrain Follow, allowing it to follow the terrain in any horizontal direction. During search and rescue operations, the size of ground objects can be kept constant on the controller screen, reducing the need for frequent zoom adjustments and improving efficiency. During mapping missions, it is possible to maintain a constant ground sampling distance (GSD) to obtain highly accurate data. What’s more, the drone can easily take off and land on ships, making it ideal for maritime patrols (it can land on moving ships and take off from stationary vessels).
Automatic operations
When paired with the Zenmuse L2 LiDAR add-on module, the drone can perform automated flights along transmission and distribution lines. It uses a rotating LiDAR to detect obstacles in real time. In addition, the DJI Matrice 400 supports inclined and geometric route planning using DJI Pilot 2 or DJI FlightHub 2. This allows it to acquire precise data – necessary, for example, for detailed aerial measurements of building facades or for mapping selected structures.
Additional capabilities – accessories and software
Enhance every operation with additional accessories. The DJI Matrice 400 is compatible with the D-RTK 3 station and the DJI Cellular Dongle 2, which enables video transmission via 4G networks. In addition, the drone works with DJI FlightHub 2 software for operations management, DJI Terra for 2D and 3D reconstruction, and DJI Modify for model editing. It also supports PSDK, MSDK, Cloud API, and model training tools, all of which further extend its functionality. The DJI Matrice 400 also guarantees data security, offering AES-256 encryption and Local Data Mode, in which the device operates completely offline.
