High performance and flight efficiency
The rugged design of the Matrice 350 RTK features an efficient drive system, increased IP rating and excellent flight performance, allowing it to easily cope with a variety of challenges.

Transmission stability thanks to the new communication system
Matrice 350 RTK uses DJI O3 Enterprise Transmission technology, which supports three-channel live streaming in 1080p HD with a maximum transmission range of 20 km. Both the drone and the remote control equipment have a four-antenna transmit and receive system that intelligently allocates two optimal antennas for signal transmission, while four antennas receive signals simultaneously. In this way, the anti-interference capabilities are significantly improved and transmission stability is optimized.

New control possibilities
Equipped with a 7-inch high-brightness screen, DJI RC Plus supports Dual Operator Mode and is equipped with a WB37 external battery that provides a runtime of up to six hours to meet various operational needs.

Designed to work in difficult conditions
Thanks to the IP54 tightness class,  DJI RC Plus is dustproof and waterproof, so it works reliably in adverse weather conditions. The operating temperature ranges from -20° to 50° C, enabling 24-hour operation even in very hot or cold environments.

Efficient and reliable control
There are several buttons and knobs on the front, back and top of the remote control for quick operation. Button functions can be adapted to user habits, ensuring intuitive and flexible operation.

DJI Pilot 2
The DJI Pilot 2 app has been further optimized to clearly present mission type and flight status. Easy and smooth control of the drone and payloads ensures more efficient work.

Improved power system
Matrice 350 RTK supports a new type of TB65 batteries, which allows them to be replaced without turning off the power. The battery provides up to 400 charging and discharging cycles, reducing the cost of a single flight.

A new generation intelligent charging station
The new BS65 charging station is a comprehensive solution for charging, storing and transporting batteries. In Storage mode, the battery will charge or discharge to 50%, which is a good solution for long-term storage. In flight-ready mode, you can quickly charge multiple battery packs to 90% to start working at any time and extend battery life. When the charging station is connected to the DJI RC Plus camera, the DJI Pilot 2 app will display the battery charge level and information about their parameters. In addition, you can set the number of self-discharge days, update firmware, export logs and access features with just a tap of your finger.

Increased security
Matrice 350 RTK features a new arm lock detection feature to avoid the risk of arms folding during flight.

FPV camera with night mode
With excellent night vision capabilities, the FPV camera can clearly present the surroundings and obstacles when flying at night. Works in conjunction with PinPoint to provide better orientation in the field.

6-way detection and positioning
The Matrice 350 RTK is equipped with a six-directional binocular vision and infrared detection system, providing six-directional obstacle detection and positioning capability, providing all-round protection during flight.

CSM radar
After installing the optional CSM radar, Matrice 350 RTK can detect small obstacles such as power lines and avoid them in time. The effective detection range is up to 30 m, which further improves flight safety.

Multi-layer redundancy technology
Both the drone and the Matrice 350 RTK sensor system have a redundant design to maximize flight safety, enabling it to more confidently cope with challenging operational conditions.

Advanced payloads
Matrice 350 RTK is compatible with Matrice 300 RTK payloads and, like its predecessor, allows the use of a single pointing gimbal installed at the bottom, a dual gimbal at the bottom  and a single gimbal installed at the top and has an open E-port interface. With a maximum payload of 2.7 kg, the drone can carry up to three payloads simultaneously, meeting the needs of various operational scenarios such as public safety, inspections and mapping.

High mapping precision
The Matrice 350 RTK supports Waypoint, Mapping, Oblique and Linear Flight missions. The user can use Terrain Follow or Smart Oblique for efficient data collection. When combined with the DJI Terra app, you can quickly obtain digital 2D and 3D results for precise and efficient terrain mapping.

Air-ground coordination
With features such as high precision PinPoint and real-time cloud mapping, Matrice 350 RTK can provide connectivity between air, ground and cloud. Once the drone has finished collecting images, DJI FlightHub 2 can quickly model the operational site and transmit command information to the drone and ground operators. Both the ara remote control and FlightHub 2 platform support real-time point, line and surface plotting and data transfer functions, and can work with the drone to transmit a real-time view of operations, overcoming communication barriers in air-ground cooperation.

Automated and precise inspections
With Live Mission Recording, the Matrice 350 RTK can generate and store flight path files that can be used at any time to perform automated operations and make repeated inspections no longer time-consuming or labor-intensive. When using AI Spot-Check, Matrice 350 RTK supports automatic cropping and manual area editing to improve the accuracy of repeat images and the quality of inspection operations.